Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
wiki:options [2012/05/24 09:00]
varunvats
wiki:options [2018/02/02 20:50]
admin
Line 1: Line 1:
 ~~DISCUSSION~~ ~~DISCUSSION~~
-~~ODT~~ 
 ====== Options ====== ====== Options ======
  
-The setup and configuration of jqGrid are controlled by setting options for the grid. Examples of configuration settings include: what should be the height and width of the grid or what type of data should be in each column.+The setup and configuration of jqGrid are controlled by setting options for the grid. Examples of configuration settings include the height and width of the gridtype of data that should be in each column, and other similar settings.
  
-The options are set in the grid options array, and many of the options are set in //name: value// pairs, separated by commas. The array is given as an argument to the declaration of the jqGrid object.+These options are set in the grid options array, and many of the options are set in ''​name: value'' ​pairs, separated by commas. The array is given as an argument to the declaration of the jqGrid object.
  
-The properties and options available are listed below in alphabetic order. Some have more details described ​at the link provided in those circumstances.+The properties and options available are listed below in alphabetic order. Some have more details described ​in other pages of this wiki and a link to those pages is provided in those circumstances.
  
-Some properties ​can'​t ​be changed after the grid is created. See the last column of this table and [[Methods]] (getGridParam and setGridParam methods).+Some properties ​cannot ​be changed after the grid is createdthe last column of the table labelled **//Can be changed?//​** mentions if that particular property can or cannot be changed. Also see [[Methods]] (getGridParam and setGridParam methods) ​for more details on this.
  
-<​note>​ The column **Can be changed?** indicates whether this parameter can or can not be changed after the grid creation.</​note>​+Also, some properties are read-only, meaning they cannot ​be changed. ​Generally these are related to server-side data fetches. ​
  
-In our tutorial, we see that jqGrid should load the appropriate language file in order to work properly. This file is used in all modules and the main purpose is to have multilingual capabilities. In this file several objects with their properties and corresponding descriptive texts are stored.+<​note>​ The column **//Can be changed?//​** indicates whether this parameter can or can not be changed after the grid creation.</​note>​
  
-The name of the main object ​in jqGrid is jQuery.jgrid or short ($.jgrid). ​ Every property ​is loaded ​in a particular method or in jqGrid itself ​The ​properties ​that are loaded in jqGrid are taken from a static object **$.jgrid.defaults**.+In our tutorial, we saw that jqGrid should load the appropriate language file in order to work properlyThis file is used in all modules and the main purpose is to have multilingual capabilitiesIn this file several objects with their properties ​and corresponding descriptive texts are stored.
  
-The English variant of these properties ​look like this:+The name of the main object in jqGrid is ''​jQuery.jgrid''​ or in short ''​$.jgrid''​. ​ Every property is loaded in a particular method or in jqGrid itself. ​ The properties that are loaded in jqGrid are taken from a static object ''​$.jgrid.defaults''​. 
 + 
 +The English variant of these properties ​looks like this:
 <code javascript>​ <code javascript>​
 $.jgrid = { $.jgrid = {
Line 30: Line 31:
 </​code>​ </​code>​
  
-In other words, the options ​**recordtext, emptyrecords,​ loadtext and pgtext** are loaded in the grid with these default values. See below how you can overwrite these values with only one line of code for all grids in your application. \\ \\  +In other words, the options ​''​recordtext''​''​emptyrecords''​''​loadtext'' ​and ''​pgtext'' ​are loaded in the grid with these default values. See below how you can overwrite these values with only one line of code for all grids in your application. \\ \\  
-^Property^Type^ Description ^Default((some default properties ​uses the English translation))^Can be changed?^ +^Property^Type^ Description ^Default((some default properties ​use the English translation))^Can be changed?^ 
-|ajaxGridOptions|object|This option allows to set global ajax settings for the grid when requesting data. Note that with this option it is possible to overwrite all current ajax settings in the grid including the error, complete and beforeSend events.|empty object|Yes| +|ajaxGridOptions|object|This option allows to set global ajax settings for the grid when requesting data. Note that with this option it is possible to overwrite all current ajax settings in the grid including the ''​error''​''​complete'' ​and ''​beforeSend'' ​events.|empty object|Yes| 
-|ajaxSelectOptions|object|This option allows to set global ajax settings for the select element when the select is obtained via dataUrl option in editoptions or searchoptions objects|empty object|Yes| +|ajaxSelectOptions|object|This option allows to set global ajax settings for the select element when the select is obtained via ''​dataUrl'' ​option in ''​editoptions'' ​or ''​searchoptions'' ​objects|empty object|Yes| 
-|altclass|string|The class that is used for alternate (zebra) rows. You can construct your own class and replace this value. This option is valid only if altRows ​options ​is set to true|ui-priority-secondary|Yes. Requires reload| +|altclass|string|The class that is used for applying different styles to alternate (zebra) rows in the grid. You can construct your own class and replace this value. This option is valid only if the ''​altRows''​ option ​is set to true|ui-priority-secondary|Yes. Requires reload| 
-|altRows|boolean|Set a zebra-striped grid| false| Yes. After reload| +|altRows|boolean|Set a zebra-striped grid (alternate rows have different styles)| false| Yes. After reload| 
-|autoencode|boolean|When set to true encodes (html encode) the incoming (from server) and posted data (from editing modules). ​By example < will be converted to &​lt;​|false|Yes| +|autoencode|boolean|When set to true encodes (html encode) the incoming (from server) and posted data (from editing modules). ​For example ​''​<'' ​will be converted to ''​&lt;''​.|false|Yes| 
-|autowidth|boolean| When set to true, the grid width is recalculated automatically to the width of the parent element. This is done only initially when the grid is created. In order to resize the grid when the parent element changes width you should apply custom code and use the setGridWidth method for this purpose|false|No| +|autowidth|boolean| When set to true, the grid width is recalculated automatically to the width of the parent element. This is done only initially when the grid is created. In order to resize the grid when the parent element changes width you should apply custom code and use the ''​setGridWidth'' ​method for this purpose|false|No| 
-|caption|string|Defines the Caption layer for the grid. This caption appears above the Header ​layer. If the string is empty the caption does not appear.|empty string| No.Method avail.| +|caption|string|Defines the caption ​for the grid. This caption appears ​in the caption layer, which is above the header ​layer (see [[How It Works]]). If the string is empty the caption does not appear.|empty string| No.Method avail.| 
-|cellLayout|integer|This option determines the padding + border width of the cell. Usually this should not be changed, but if custom changes to td element are made in the grid css file this will need to be changed. The initial value of 5 means paddingLef=>2+paddingRight=>2+borderLeft=>1=5|5|No| +|cellLayout|integer|This option determines the padding + border width of the cell. Usually this should not be changed, but if custom changes to the ''​td'' ​element are made in the grid css filethis will need to be changed. The initial value of 5 means paddingLef(2+ paddingRight ​(2+ borderLeft ​(1= 5|5|No| 
-|cellEdit|boolean|Enables (disables) cell editing. See Cell Editing for more details|false| Yes| +|cellEdit|boolean|Enables (disables) cell editing. See [[Cell Editing]] for more details|false| Yes| 
-|cellsubmit|string|Determines where the contents of the cell are saved'​remote' ​or '​clientArray'​. See Cell Editing for more details|'​remote'​|Yes| +|cellsubmit|string|Determines where the contents of the cell are saved. Possible values are ''​remote'​' and ''​clientArray''. See [[Cell Editing]] for more details.|'​remote'​|Yes| 
-|cellurl|string|the url where the cell is to be saved. See Cell Editing for more details|null|Yes| +|cellurl|string|the url where the cell is to be saved. See [[Cell Editing]] for more details|null|Yes| 
-|cmTemplate| object | Defines a set of properties which overwrite ​the default values in column ModelBy example if you want to make all columns not sortable, then only one propery here can be written ​instead of specifying it in all columns in column model | null | No |+|cmTemplate| object | Defines a set of properties which override ​the default values in ''​colModel''​For example if you want to make all columns not sortable, then only one propery here can be specified ​instead of specifying it in all columns in ''​colModel'' ​| null | No |
 |colModel|array|Array which describes the parameters of the columns.This is the most important part of the grid. For a full description of all valid values see [[wiki:​colmodel_options | colModel API]]. |empty array| No| |colModel|array|Array which describes the parameters of the columns.This is the most important part of the grid. For a full description of all valid values see [[wiki:​colmodel_options | colModel API]]. |empty array| No|
-|colNames|array[]|An array in which we place the names of the columns. This is the text that appears in the head of the grid (Header ​layer). The names are separated with commas. Note that the number of element ​in this array should be equal of the number elements in the colModel array.|empty array[]|No| +|colNames|array|An array in which we place the names of the columns. This is the text that appears in the head of the grid (header ​layer). The names are separated with commas. Note that the number of elements ​in this array should be equal of the number elements in the ''​colModel'' ​array.|empty array[]|No| 
-|data|array|array that store the local data passed to the grid. You can directly point to this variable in case you want to load array data. It can replace addRowData method which is slow on relative big data| empty array| Yes|+|data|array|An array that stores ​the local data passed to the grid. You can directly point to this variable in case you want to load an array data. It can replace ​the ''​addRowData'' ​method which is slow on relative big data| empty array| Yes|
 |datastr|string|The string of data when datatype parameter is set to [[wiki:​retrieving_data#​xml_string | xmlstring]] or [[wiki:​retrieving_data#​json_string | jsonstring]]|null|Yes| |datastr|string|The string of data when datatype parameter is set to [[wiki:​retrieving_data#​xml_string | xmlstring]] or [[wiki:​retrieving_data#​json_string | jsonstring]]|null|Yes|
-|datatype|string|Defines what type of information ​to expect ​to represent ​data in the grid. Valid options are xml we expect ​xml dataxmlstring ​we expect xml data as stringjson we expect ​JSON datajsonstring ​we expect JSON data as stringlocal we expect data defined at client side (array data)javascript ​we expect javascript as datafunction ​custom defined function for retrieving data. See [[wiki:​colmodel_options | colModel API]] and [[wiki:​retrieving_data| Retrieving Data]]|xml| Yes| +|datatype|string|Defines ​in what format ​to expect ​the data that fills the grid. Valid options are ''​xml''​ (we expect data in xml format), ''​xmlstring''​ (we expect xml data as string), ''​json''​ (we expect data in JSON format), ''​jsonstring''​ (we expect JSON data as string), ''​local''​ (we expect data defined at client side (array data)), ''​javascript''​ (we expect javascript as data), ''​function''​ (custom defined function for retrieving data), or ''​clientSide''​ to manually load data via the ''​data''​ array. See [[wiki:​colmodel_options | colModel API]] and [[wiki:​retrieving_data| Retrieving Data]]|xml| Yes| 
-|deepempty|boolean|This option should be set to true if event or a plugin is attached to the table cell. The option uses jQuery empty for the the row and all its children elements. This have of course speed overhead, but prevent ​memory leaks|false|Yes| +|deepempty|boolean|This option should be set to ''​true'' ​if an event or a plugin is attached to the table cell. The option uses jQuery empty for the the row and all its children elements. This of course ​has speed overhead, but prevents ​memory leaks. This option should be set to ''​true''​ if a sortable rows and/or columns are activated.|false|Yes| 
-|deselectAfterSort|boolean|Applicable only when we use datatype : local. Deselects currently-selected row(s) when a sort is applied.|true| Yes| +|deselectAfterSort|boolean|Applicable only when we use ''​datatype : local''​. Deselects currently selected row(s) when a sort is applied.|true| Yes| 
-|direction|string|Determines the language ​direction in grid. The default is "ltr" ​(Left To Right language). When set to "rtl" ​ ​(Right To Left) the grid automatically ​do the needed. It is important to note that in one page we can have two (or more) grids where the one can have direction ​"ltr" ​while the other can have direction ​"rtl". This option ​work only in FireFox ​3.x versions and Internet Explorer versions >=6. Currently ​Safai and Google Chrome ​does not support ​fully direction "​rtl"​. Also the same apply to Opera browsers. The most common problem in FireFox ​is that the default settings of the browser ​does not support ​RTL. In order change this see [[wiki:​howto_grid_base |HOW TO]] section in this chapter .|ltr|No|  +|direction|string|Determines the direction ​of text in the grid. The default is ''​ltr'' ​(Left To Right). When set to ''​rtl'' ​ ​(Right To Left) the grid automatically ​changes ​the direction of the text. It is important to note that in one page we can have two (or more) grids where the one can have direction ​''​ltr'' ​while the other can have direction ​''​rtl''​. This option ​works only in Firefox ​3.x versions and Internet Explorer versions >=6. Currently ​Safari, ​Google Chrome ​and Opera do not completely ​support ​changing ​the direction ​to ''​rtl''​. The most common problem in Firefox ​is that the default settings of the browser ​do not support ​''​rtl''​. In order change this see this [[wiki:​howto_grid_base |HOW TO]] section in this chapter .|ltr|No|  
-|editurl|string|Defines the url for inline and form editing.|null|Yes| +|editurl|string|Defines the url for inline and form editing. May be set to ''​clientArray''​ to manually post data to server, see [[wiki:​inline_editing&​s[]=clientarray |Inline Editing]]. |null|Yes| 
-|emptyrecords| string| ​Display the information ​when the returned (or the current) number of records is zero. This option is valid only if viewrecords option is set to true.|see lang file|Yes| +|emptyrecords| string| ​The string to display ​when the returned (or the current) number of records ​in the grid is zero. This option is valid only if ''​viewrecords'' ​option is set to ''​true''​.|see lang file|Yes| 
-|ExpandColClick|boolean|when true, the treeGrid is expanded and/or collapsed when we click on the text of the expanded columnnot only on the image|true|No| +|ExpandColClick|boolean| ​When ''​true''​, the tree grid (see ''​treeGrid''​) ​is expanded and/or collapsed when we click anywhere ​on the text in the expanded column. In this case it is not necessary to click exactly ​on the icon. |true|No| 
-|ExpandColumn|string|indicates ​which column (name from colModel) should be used to expand the tree grid. If not set the first one is used. Valid only when treeGrid option is set to true.|null| No| +|ExpandColumn|string| ​Indicates ​which column (name from ''​colModel''​) should be used to expand the tree grid. If not set the first one is used. Valid only when the ''​treeGrid'' ​option is set to ''​true''​.|null| No| 
-|footerrow|boolean|If set to true this will place a footer table with one row below the gird records and above the pager. The number of columns equal of these from colModel|false|No| +|footerrow|boolean|If set to ''​true'' ​this will place a footer table with one row below the gird records and above the pager. The number of columns equal those specified in ''​colModel''​|false|No| 
-|forceFit|boolean|If set to true, and resizing the width of a column, the adjacent column (to the right) will resize so that the overall grid width is maintained (e.g., reducing the width of column 2 by 30px will increase the size of column 3 by 30px). In this case there is no horizontal ​scrolbar. Note: this option is not compatible with shrinkToFit option - i.e if shrinkToFit is set to false, forceFit is ignored.|false|No| +|forceFit|boolean|If set to ''​true''​, and a column's width is changed, the adjacent column (to the right) will resize so that the overall grid width is maintained (e.g., reducing the width of column 2 by 30px will increase the size of column 3 by 30px). In this case there is no horizontal ​scrollbar**Note:** This option is not compatible with ''​shrinkToFit'' ​option - i.e if ''​shrinkToFit'' ​is set to false, ​''​forceFit'' ​is ignored.|false|No| 
-|gridstate|string|Determines the current state of the grid (i.e. when used with hiddengrid, hidegrid and caption options). Can have either of two states: '​visible'​ or '​hidden'​|visible|No| +|gridstate|string| Determines the current state of the grid (i.e. when used with ''​hiddengrid''​''​hidegrid'' ​and ''​caption'' ​options). Can have either of two states: ​''​visible'' or ''​hidden'​'​. ​|visible|No| 
-|gridview|boolean|In the previous versions of jqGrid including 3.4.X,​reading a relatively ​big data sets (Rows >=100 ) caused speed problems. The reason for this was that as every cell was inserted into the grid we applied about 5-6 jQuery calls to it. Now this problem is resolved; we now insert the entry row at once with a jQuery append. The result is impressive - about 3-5 times faster. What will be the result if we insert all the data at once? Yes, this can be done with a help of gridview option ​when set to true. The result is a grid that is 5 to 10 times faster. Of course when this option is set to true we have some limitations. If set to true we can not use treeGrid, subGrid, or afterInsertRow event. If you do not use these three options in the grid you can set this option to true and enjoy the speed.|false|Yes| +|gridview|boolean| In the previous versions of jqGrid including 3.4.X, reading a relatively ​large data set (number of rows >= 100 ) caused speed problems. The reason for this was that as every cell was inserted into the grid we applied about 5 to 6 jQuery calls to it. Now this problem is resolved; we now insert the entry row at once with a jQuery append. The result is impressive - about 3 to 5 times faster. What will be the result if we insert all the data at once? Yes, this can be done with a help of ''​gridview'' ​option ​ (set it to ''​true''​). The result is a grid that is 5 to 10 times faster. Of coursewhen this option is set to ''​true'' ​we have some limitations. If set to ''​true'' ​we can not use ''​treeGrid''​''​subGrid''​, or the ''​afterInsertRow'' ​event. If you do not use these three options in the grid you can set this option to ''​true'' ​and enjoy the speed. |false|Yes| 
-|grouping|boolean| Enables grouping in grid. Please refer [[grouping]] page.|false|Yes| +|grouping|boolean| Enables grouping in grid. Please refer to the [[Grouping]] page. |false|Yes| 
-|headertitles|boolean|If the option is set to true the title attribute is added to the column headers|false|No| +|headertitles|boolean| If the option is set to ''​true'' ​the title attribute is added to the column headers|false|No| 
-|height|mixed|The height of the grid. Can be set as number (in this case we mean pixels) or as percentage (only 100% is acceped) or value of auto is acceptable.|150|No.Method avail.| +|height|mixed| The height of the grid. Can be set as number (in this case we mean pixels) or as percentage (only 100% is acceped) or value of ''​auto'' ​is acceptable. |150|No.Method avail.| 
-|hiddengrid|boolean|If set to true the grid initially is hidden. The data is not loaded (no request is sent) and only the caption layer is shown. When the show/hide button is clicked the first time to show grid, the request is sent to the server, the data is loaded, and grid is shown. From this point we have a regular grid. This option has effect only if the caption property is not empty and the hidegrid property (see below) is set to true.|false| No| +|hiddengrid|boolean| If set to ''​true'' ​the grid is initially is hidden. The data is not loaded (no request is sent) and only the caption layer is shown. When the show/hide button is clicked ​for the first time to show grid, the request is sent to the server, the data is loaded, and grid is shown. From this point we have a regular grid. This option has effect only if the ''​caption'' ​property is not empty and the ''​hidegrid'' ​property (see below) is set to ''​true''​. |false| No| 
-|hidegrid|boolean|Enables or disables the show/hide grid button, which appears on the right side of the Caption ​layer. Takes effect only if the caption property is not an empty string.|true|No| +|hidegrid|boolean| Enables or disables the show/hide grid button, which appears on the right side of the caption ​layer (see [[how_it_works | How It Works]]). Takes effect only if the ''​caption'' ​property is not an empty string. |true|No| 
-|hoverrows|boolean|When set to false the mouse hovering ​is disabled in the grid data rows.|true|Yes| +|hoverrows|boolean| When set to ''​false'' ​the effect of mouse hovering ​over the grid data rows is disabled.|true|Yes| 
-|idPrefix|string|When set this string is added as prefix to the id of the row when it is build|empty|Yes| +|idPrefix|string|When setthis string is added as prefix to the id of the row when it is built. ​|empty|Yes| 
-|ignoreCase|boolean|By default the local searching is case sensitive. To make the local search and sorting not case sensitive ​set this options to true |false|Yes| +|ignoreCase|boolean|By default the local searching is case-sensitive. To make the local search and sorting not case-insensitive ​set this options to ''​true'' ​|false|Yes| 
-|inlineData|empty object|an array used to add content to the data posted to the server when we are in inline editing.|{}|Yes| +|inlineData|empty object|an array used to add content to the data posted to the server when we are in inline editing. |{}|Yes| 
-|jsonReader|array|Array which describes the structure of the expected json data. For a full description and default setting, see [[wiki:​retrieving_data#​json_data| Retrieving Data JSON Data]]| |No| +|jsonReader|array| ​An array which describes the structure of the expected json data. For a full description and default setting, see [[wiki:​retrieving_data#​json_data| Retrieving Data JSON Data]]| |No| 
-|lastpage|integer|Readonly property. Determines ​the total number of pages returned from the request. |0|No| +|lastpage|integer| ​Gives the total number of pages returned from the request. If you use a function as datatype, your_grid.setGridParam({lastpage:​ your_number}) can be used to specify the max pages in the pager. |0|No| 
-|lastsort|integer|Readonly property. ​Determines ​the index of last sorted column beginning from 0|0|No| +|lastsort|integer| Readonly property. ​Gives the index of last sorted column beginning from 0|0|No| 
-|loadonce|boolean|If this flag is set to true, the grid loads the data from the server only once (using the appropriate datatype). After the first request the datatype parameter is automatically changed to local and all further manipulations are done on the client side. The functions of the pager (if present) are disabled.|false|No| +|loadonce|boolean|If this flag is set to ''​true''​, the grid loads the data from the server only once (using the appropriate datatype). After the first requestthe datatype parameter is automatically changed to ''​local'' ​and all further manipulations are done on the client side. The functions of the pager (if present) are disabled.|false|No| 
-|loadtext|string|The text which appear ​when requesting and sorting data. This parameter is located in language file|Loading...|No| +|loadtext|string| The text which appears ​when requesting and sorting data. This parameter is located in language file|Loading...|No| 
-|loadui|string| This option controls what to do when an ajax operation is in progress.\\ **disable** - disables the jqGrid progress indicator. This way you can use your own indicator.\\ **enable** (default) - enables "Loading" message ​in the center of the grid. \\ **block** - enables ​the "​Loading"​ message ​and blocks all actions in the grid until the ajax request ​is finished. Note that this disables paging, sorting and all actions on toolbar, if any. |enable|Yes| +|loadui|string| This option controls what to do when an ajax operation is in progress.\\ **disable** - disables the jqGrid progress indicator. This way you can use your own indicator.\\ **enable** (default) - shows the text set in the ''​loadtext''​ property (default value is ''​Loading...''​) ​in the center of the grid. \\ **block** - displays ​the text set in the ''​loadtext''​ property ​and blocks all actions in the grid until the ajax request ​completes. Note that this disables paging, sorting and all actions on toolbar, if any. |enable|Yes| 
-|mtype|string|Defines the type of request to make ("​POST"​ or "​GET"​)|GET|Yes| +|mtype|string| Defines the type of request to make ("​POST"​ or "​GET"​) |GET|Yes| 
-|multikey|string|This parameter ​have sense only multiselect option is set to true. Defines the key which will be pressed when we make multiselection. The possible values are: **shiftKey** - the user should press Shift Key **altKey** - the user should press Alt Key **ctrlKey** - the user should press Ctrl Key|empty string|Yes| +|multikey|string|This parameter ​makes sense only when the ''​multiselect'' ​option is set to ''​true''​. Defines the key which should ​be pressed when we make multiselection. The possible values are: ''​shiftKey'' ​- the user should press Shift Key, ''​altKey'' ​- the user should press Alt Key, and ''​ctrlKey'' ​- the user should press Ctrl Key|empty string|Yes| 
-|multiboxonly|boolean|This option works only when multiselect ​true. When multiselect is set to true, clicking anywhere on a row selects that row; when multiboxonly is also set to true, the multiselection is done only when the checkbox is clicked (Yahoo style). Clicking in any other row (suppose the checkbox is not clicked) deselects all rows and the current row is selected.|false|Yes| +|multiboxonly|boolean| This option works only when the ''​multiselect''​ option is set to ''​true''​. When ''​multiselect'' ​is set to ''​true''​, clicking anywhere on a row selects that row; when ''​multiboxonly'' ​is also set to ''​true''​, the multiselection is done only when the checkbox is clicked (Yahoo style). Clicking in any other row (suppose the checkbox is not clicked) deselects all rows and selects ​the current row. |false|Yes| 
-|multiselect|boolean|If this flag is set to true a multi selection of rows is enabled. A new column at left side is added. Can be used with any datatype option.|false| No. see HOWTO| +|multiselect|boolean| If this flag is set to ''​true'' ​a multi selection of rows is enabled. A new column at left side containing checkboxes ​is added. Can be used with any datatype option. |false| No. see HOWTO| 
-|multiselectWidth|integer|Determines the width of the multiselect ​column ​if multiselect is set to true.|20|No+|multiselectWidth|integer| Determines the width of the checkbox ​column ​created when the ''​multiselect''​ option ​is enabled. |20|No| 
-|page|integer|Set the initial number ​of page when we make the request.This parameter is passed to the url for use by the server routine retrieving the data|1|Yes| +|multiSort|boolean|If ​set to true enables the multisortingThe options work if the datatype is local. In case when the data is obtained from the server the //sidx// parameter contain the order clause. It is a comma separated string in format field1 asc, field2 desc ..., fieldN. Note that the last field does not not have asc or desc. It should be obtained from sord parameter \\ When the option is true the behavior is a s follow. The first click of the header field sort the field depending on the firstsortoption parameter in colModel or sortorder grid parameter. The next click sort it in reverse order. The third click removes the sorting from this field|false|Yes
-|pager|mixed|Defines that we want to use a pager bar to navigate through the records. This must be a valid html element; in our example we gave the div the id of "​pager",​ but any name is acceptable. Note that the Navigation ​layer (the "​pager"​ div) can be positioned anywhere you want, determined by your html; in our example we specified that the pager will appear after the Table Body layer. The valid calls can be (using our example) '​pager',​ '#​pager',​ jQuery('#​pager'​). I recommend to use the second one. See [[Pager]]|empty string. Currently only one pagebar is possible.|No| +|page|integer| Set the initial ​page number when we make the request.This parameter is passed to the url for use by the server routine retrieving the data|1|Yes| 
-|pagerpos|string| Determines the position of the pager in the grid. By default the pager element when created is divided in 3 parts (one part for pager, one part for navigator buttons and one part for record information)|center|No| +|pager|mixed| Defines that we want to use a pager bar to navigate through the records. This must be a valid HTML element; in our example we gave the div the id of "​pager",​ but any name is acceptable. Note that the navigation ​layer (the "​pager"​ div) can be positioned anywhere you want, determined by your HTML; in our example we specified that the pager will appear after the  ​body ​layer. The valid settings ​can be (in the context of our example) ​''pager'', ​''#​pager'', ​''​jQuery('#​pager'​)''​. I recommend to use the second one - ''#​pager''​. See [[Pager]]|empty string. ​<del>Currently only one pagebar is possible.</​del>​|No| 
-|pgbuttons|boolean|Determines if the Pager buttons should be shown if pager is available. Also valid only if pager is set correctly. The buttons are placed in the pager bar. |true|No| +|pagerpos|string| Determines the position of the pager in the grid. By default the pager element when created is divided in 3 parts (one part for pager, one part for navigator buttons and one part for record information)|center|No| 
-|pginput|boolean|Determines if the input box, where the user can change the number of requested page, should be available. The input box appear ​in the pager bar. |true|No| +|pgbuttons|boolean| Determines if the Pager buttons should be shown if pager is available. Also valid only if ''​pager'' ​is set correctly. The buttons are placed in the pager bar. |true|No| 
-|pgtext|string|Show information about current page status. The first value is the current loaded page. The second value is the total number of pages|See lang file|Yes| +|pginput|boolean| Determines if the input box, where the user can change the number of the requested page, should be available. The input box appears ​in the pager bar. |true|No| 
-|prmNames|array| ​Default values prmNames: \\ {page:"​page",​rows:"​rows",​ sort: "​sidx",​ order: "​sord",​ search:"​_search",​ nd:"​nd",​ id:"​id",​ oper:"​oper",​ editoper:"​edit",​ addoper:"​add",​ deloper:"​del",​ subgridid:"​id",​ npage: null, totalrows:"​totalrows"​} \\ Customizes ​names of the fields sent to the server on a Post. For example, with this setting, you can change the sort order element from "sidx" ​to "mysort": ​prmNames: {sort: "​mysort"​}. The string that will be posted ​to the server will then be myurl.php?​page=1&​rows=10&​mysort=myindex&​sord=asc ​ rather than myurl.php?​page=1&​rows=10&​sidx=myindex&​sord=asc \\ When some parameter is set to null they will be not sent to the server. ​By example if we set prmNames: { nd:null} the nd parameter will not be sent.  For npage option see scroll option. \\ The options ​mean the following \\ page - the the requested page default value page\\ rows the number of rows requested ​default value rows\\ sort the sorting column ​default value sidx\\ order the sort order default value sord\\ search ​the search indicator ​default value _search\\ nd the time passed to the request (for IE browsers not to cache the request) ​default value nd\\ id the name of the id when post data in editing modules ​default value id\\ oper the operation parameter ​default value oper\\ editoper ​the name of operation when the data is posted ​in edit mode default value edit\\ addoper ​the name of operation when the data is posted in add mode default value add,\\ deloper ​the name of operation when the data is posted in delete mode default value del \\ totalrows ​the name of the total rows to be obtained from server - see rowTotal ​default value totalrows \\ subgridid ​the name passed when we click to load data in subgrid ​default value id| none |Yes| +|pgtext|string|Show information about current page status. The first value is the current loaded page. The second value is the total number of pages|See lang file|Yes| 
-|postData|array|This array is passed ​directly to the url. This is associative array and can be used this way: {name1:​value1...}. See API methods for manipulation.|empty array|Yes| +|prmNames|array| ​The default value of this property is: \\ ''​{page:"​page",​rows:"​rows",​ sort:"​sidx",​ order:"​sord",​ search:"​_search",​ nd:"​nd",​ id:"​id",​ oper:"​oper",​ editoper:"​edit",​ addoper:"​add",​ deloper:"​del",​ subgridid:"​id",​ npage:null, totalrows:"​totalrows"​}'' ​\\ This customizes ​names of the fields sent to the server on a POST request. For example, with this setting, you can change the sort order element from ''​sidx'' ​to ''​mysort''​ by setting ''​prmNames: {sort: "​mysort"​}''​. The string that will be POST-ed ​to the server will then be ''​myurl.php?​page=1&​rows=10&​mysort=myindex&​sord=asc'' ​ ​rather than ''​myurl.php?​page=1&​rows=10&​sidx=myindex&​sord=asc'' ​\\ So the value of the column on which to sort upon can be obtained by looking at ''​$POST['​mysort'​]''​ in PHP. When some parameter is set to null, it will be not sent to the server. ​For example if we set ''​prmNames: {nd:null}'' ​the ''​nd'' ​parameter will not be sent to the server.  For ''​npage'' ​option see the ''​scroll'' ​option. \\ These options ​have the following ​meaning and default values: ​\\ ''​page'': ​the requested page (default value ''​page''​) ​\\ ''​rows'': ​the number of rows requested ​(default value ''​rows''​) ​\\ ''​sort'': ​the sorting column ​(default value ''​sidx''​) ​\\ ''​order'': ​the sort order (default value ''​sord''​) ​\\ ''​search'': ​the search indicator ​(default value ''​_search''​) ​\\ ''​nd'': ​the time passed to the request (for IE browsers not to cache the request) ​(default value ''​nd''​) ​\\ ''​id'': ​the name of the id when POST-ing ​data in editing modules ​(default value ''​id''​) ​\\ ''​oper'': ​the operation parameter ​(default value ''​oper''​) ​\\ ''​editoper'': ​the name of operation when the data is POST-ed ​in edit mode (default value ''​edit''​) ​\\ ''​addoper'': ​the name of operation when the data is posted in add mode (default value ''​add''​) ​\\ ''​deloper'': ​the name of operation when the data is posted in delete mode (default value ''​del''​) ​\\ ''​totalrows'': ​the number ​of the total rows to be obtained from server - see ''​rowTotal''​ (default value ''​totalrows''​) ​\\ ''​subgridid'': ​the name passed when we click to load data in the subgrid ​(default value ''​id''​) ​| none |Yes| 
-|reccount|integer|Readonly property. Determines the exactly ​number of rows in the grid. Do not mix this with records parameter. ​Instead that in most cases they are equal there is a case where this is not trueBy example you define rowNum ​parameter ​15, but you return from server ​records parameter = 20, then the records parameter will be 20, the reccount parameter will be 15, and in the grid you will have 15 records.|0|No| +|postData|array| This array is appended ​directly to the url. This is an associative array and can be used this way: ''​{name1:​value1...}''​. See API methods for manipulation. |empty array|Yes| 
-|recordpos|string|Determines the position of the record information in the pager. Can be left, center, right|right|No| +|reccount|integer| Readonly property. Determines the exact number of rows in the grid. Do not confuse ​this with ''​records'' ​parameter. ​Although ​in many cases they may be equalthere are cases where they are not. For example, if you define ​''​rowNum''​ to be 15, but the request to the server ​returns ​20 records, the ''​records'' ​parameter will be 20, but the ''​reccount'' ​parameter will be 15 (the grid you will have 15 records ​and not 20). |0|No| 
-|records|integer|Readonly property. ​Determines ​the number of returned ​records ​in grid from the request|none|No| +|recordpos|string| Determines the position of the record information in the pager. Can be ''​left''​''​center''​''​right''​. ​|right|No| 
-|recordtext|string|Represent information ​that can be shown in the pager. Also this option is valid if viewrecords option is set to true. This text appears only if the total number of records is greater then zero.In order to show or hide some information the items in {} mean the following: {0} the start position of the records depending on page number and number of requested records{1} - the end position {2} - total records returned from the data| see lang file|Yes| +|records|integer| Readonly property. ​Gives the number of records ​returned as a result of a query to the server. ​|none|No| 
-|resizeclass|string|Assigns a class to columns that are resizable so that we can show a resize handle only for ones that are resizable|empty string|No| +|recordtext|string| ​Text that can be shown in the pager. Also this option is valid if ''​viewrecords'' ​option is set to ''​true''​. This text appears only if the total number of records is greater then zero. In order to show or hide some information the items in {} mean the following: ​\\ {0} the start position of the records depending on page number and number of requested records ​\\ {1} - the end position ​\\ {2} - total records returned from the server. ​| see lang file|Yes| 
-|rowList|array[]|An array to construct a select box element in the pager in which we can change the number of the visible rows. When changed during the execution, this parameter replaces the rowNum parameter that is passed to the url. If the array is empty the element does not appear in the pager. Typically you can set this like [10,20,30]. If the rowNum parameter is set to 30 then the selected value in the select box is 30.|empty ​array - []|No| +|resizeclass|string| Assigns a class to columns that are resizable so that we can show a resize handle only for ones that are resizable|empty string|No| 
-|rownumbers|boolean| If this option is set to true, a new column at left of the grid is added. The purpose of this column is to count the number of available rows, beginning from 1. In this case colModel is extended automatically with new element with name '​rn'​. ​Also, be careful ​not to use the name '​rn'​ in colModel|false|No| +|rowList|array[]| An array to construct a select box element in the pager in which we can change the number of the visible rows. When changed during the execution, this parameter replaces the ''​rowNum'' ​parameter that is passed to the url. If the array is empty, this element does not appear in the pager. Typically you can set this like ''​[10,20,30]''​. If the ''​rowNum'' ​parameter is set to 30 then the selected value in the select box is 30. |empty ​arrray|No| 
-|rowNum|integer|Sets how many records we want to view in the grid. This parameter is passed to the url for use by the server routine retrieving the data. Note that if you set this parameter to 10 (i.e. retrieve 10 records) and your server return 15 then only 10 records will be loaded. <​del>​Set this parameter to **-1** ​ (unlimited) to disable this checking.</​del>​ |20|Yes| +|rownumbers|boolean| If this option is set to ''​true''​, a new column at left of the grid is added. The purpose of this column is to count the number of available rows, beginning from 1. In this case ''​colModel'' ​is extended automatically with new element with the name ''rn''​. ​**Note:** Do not to use the name ''rn'' in the ''​colModel''​. ​|false|No| 
-|rowTotal| integer| When set this parameter can instruct the server to load the total number of rows needed to work on. Note that rowNum determines the total records displayed in the grid, while rowTotal determines the total number of rows on which we can operate. When this parameter is set, we send an additional parameter to the server named totalrows. You can check for this parameter, and if it is available you can replace the rows parameter with this one. Mostly this parameter can be combined with loadonce parameter set to true.|null| Yes| +|rowNum|integer| Sets how many records we want to view in the grid. This parameter is passed to the url for use by the server routine retrieving the data. Note that if you set this parameter to 10 (i.e. retrieve 10 records) and your server return 15 then only 10 records will be loaded. <​del>​Set this parameter to **-1** ​ (unlimited) to disable this checking.</​del>​ |20|Yes| 
-|rownumWidth|integer|Determines the width of the row number column if rownumbers option is set to true.|25|No| +|rowTotal| integer| When set this parameter can instruct the server to load the total number of rows needed to work on. Note that ''​rowNum'' ​determines the total records displayed in the grid, while ''​rowTotal'' ​determines the total number of rows on which we can operate. When this parameter is set, we send an additional parameter to the server named ''​totalrows''​. You can check for this parameter, and if it is available you can replace the ''​rows'' ​parameter with this one. Mostly this parameter can be combined with ''​loadonce'' ​parameter set to ''​true''​.|null| Yes| 
-|savedRow|array| This is read only property and is used in Inline ​and cell editing modules to store the data, before editing the row or cell. See [[Cell ​editing]] and [[Inline ​editing]].|empty array|No|+|rownumWidth|integer| Determines the width of the row number column if ''​rownumbers'' ​option is set to ''​true''​. |25|No| 
 +|savedRow|array| This is a readonly ​property and is used in inline ​and cell editing modules to store the data, before editing the row or cell. See [[Cell ​Editing]] and [[Inline ​Editing]]. |empty array|No|
 |<​del>​searchdata</​del>​|<​del>​array {}</​del>​|<​del>​This property contain the searched data in pair name:​value.</​del>​|<​del>​empty array{}</​del>​|<​del>​Yes</​del>​| |<​del>​searchdata</​del>​|<​del>​array {}</​del>​|<​del>​This property contain the searched data in pair name:​value.</​del>​|<​del>​empty array{}</​del>​|<​del>​Yes</​del>​|
-|scroll|boolean or \\ integer|Creates dynamic scrolling grids. When enabled, the pager elements are disabled and we can use the vertical scrollbar to load data. When set to true the grid will always hold all the items from the start through to the latest point ever visited. \\ When scroll is set to value  (eg 1), the grid will just hold the visible lines. This allow us to load the data in portions whitout caring about the memory leaks. In addition to this we have an optional extension to the server protocol: npage (see prmNames array). If you set the npage option in prmNames, then the grid will sometimes request more than one page at a time; if not, it will just perform multiple ​gets.|false|No| +|scroll|boolean or \\ integer|Creates dynamic scrolling grids. When enabled, the pager elements are disabled and we can use the vertical scrollbar to load data. When set to ''​true'' ​the grid will always hold all the items from the start through to the latest point ever visited. \\ When ''​scroll'' ​is set to an integer ​value  (example ​1), the grid will just hold the visible lines. This allow us to load the data in portions whitout caring about memory leaks. In addition to this we have an optional extension to the server protocol: ​''​npage'' ​(see ''​prmNames'' ​array). If you set the npage option in ''​prmNames''​, then the grid will sometimes request more than one page at a time; if not, it will just perform multiple ​GET requests. \\ Note that this option is not compatible when a grid parameter **height** is set to ''​auto''​ or ''​100%''​. |false|No| 
-|scrollOffset|integer|Determines the width of the vertical scrollbar. Since different browsers interpret this width differently (and it is difficult to calculate it in all browsers) this can be changed.|18|No.Method avail.| +|scrollOffset|integer| Determines the width of the vertical scrollbar. Since different browsers interpret this width differently (and it is difficult to calculate it in all browsers) this can be changed. |18|No.Method avail.| 
-|scrollTimeout|integer \\ (milliseconds)|This controls the timeout handler when scroll is set to 1.|200|Yes| +|scrollTimeout|integer \\ (milliseconds)| This controls the timeout handler when ''​scroll'' ​is set to 1. |200|Yes| 
-|scrollrows|boolean|When enabled, selecting a row with setSelection scrolls the grid so that the selected row is visible. This is especially useful when we have a verticall scrolling grid and we use form editing with navigation buttons (next or previous row). On navigating to a hidden row, the grid scrolls so that the selected row becomes visible.|false|Yes| +|scrollrows|boolean| When enabled, selecting a row with ''​setSelection'' ​scrolls the grid so that the selected row is visible. This is especially useful when we have a verticall scrolling grid and we use form editing with navigation buttons (next or previous row). On navigating to a hidden row, the grid scrolls so that the selected row becomes visible. |false|Yes| 
-|selarrrow|array-[]|This options is read only. Gives the currently selected rows when multiselect is set to true. This is one dimensional array and the values in the array correspond to the selected id's in the grid.|empty array []|No| +|selarrrow|array| This options is readonly. Gives the currently selected rows when ''​multiselect'' ​is set to ''​true''​. This is one-dimensional array and the values in the array correspond to the selected id's in the grid. |empty array []|No| 
-|selrow|string|This option is read onlyContain ​the id of the last selected row. If you sort or apply a pagging ​this options is set to null|null|No| +|selrow|string| This option is readonlyIt contains ​the id of the last selected row. If you sort or use paging, ​this options is set to null|null|No| 
-|shrinkToFit|boolean or \\ integer|This option, if set, defines how the the width of the columns of the grid should be re-calculated,​ taking into consideration the width of the grid. If this value is true, and the width of the columns is also set, then every column is scaled in proportion to its width. For example, if we define two columns with widths 80 and 120 pixels, but want the grid to have a width of 300 pixels, then the extra width assigned to the columns depends ​on the width of the column itself ​and the extra width available. The re-calculation is done as follows: the first column gets the width (300(new width)/​200(sum of all width))*80(first column width) = 120 pixels, and the second column gets the width (300(new width)/​200(sum of all width))*120(second column width) = 180 pixels. Now the widths of the columns sum up to 300 pixels, which is the width of the grid. If the value is false and the value in width option is set, then the widths of the columns are not re-calculated (they retain the widths specified in the width option in colModel) and the width of the remains unchanged. So in the example ​that we saw, if shrinkToFit is set to false, column one will have a width of 80 pixels, column two will have a width of 120 pixels and the grid will retain the width of 300 pixels. If the value of shrinkToFit is an integer, the width is calculated according to it.|true|No| +|shrinkToFit|boolean or \\ integer| This option, if set, defines how the the width of the columns of the grid should be re-calculated,​ taking into consideration the width of the grid. If this value is ''​true''​, and the width of the columns is also set, then every column is scaled in proportion to its width. For example, if we define two columns with widths 80 and 120 pixels, but want the grid to have a width of 300 pixels, then the columns will stretch to fit the entire grid, and the extra width assigned to them will depend ​on the width of the columns themselves ​and the extra width available. The re-calculation is done as follows: the first column gets the width (300(new width)/​200(sum of all widths))*80(first column width) = 120 pixels, and the second column gets the width (300(new width)/​200(sum of all widths))*120(second column width) = 180 pixels. Now the widths of the columns sum up to 300 pixels, which is the width of the grid. If the value is false and the value in ''​width'' ​option is set, then no re-sizing happens whatsoever. So in this example, if ''​shrinkToFit'' ​is set to false, column one will have a width of 80 pixels, column two will have a width of 120 pixels and the grid will retain the width of 300 pixels. If the value of shrinkToFit is an integer, the width is calculated according to it. FIXME - The effect of using an integer can be elaborated. |true|No| 
-|sortable|boolean|When set to true, this option allows reordering columns by dragging and dropping them with the mouse. Since this option uses the jQuery UI sortable widget, be sure to load this widget and its related files in HTML head tag of the page. Also, be sure to select the jQuery UI Addons option under the jQuery UI Addon Methods section while downloading jqGrid if you want to use this facility.|false|No|  +|sortable|boolean| When set to ''​true''​, this option allows reordering columns by dragging and dropping them with the mouse. Since this option uses the jQuery UI sortable widget, be sure to load this widget and its related files in the HTML head tag of the page. Also, be sure to select the jQuery UI Addons option under the jQuery UI Addon Methods section while downloading jqGrid if you want to use this facility. **Note:** The ''​colModel''​ object also has a property called ''​sortable'',​ which specifies if the grid data can be sorted on a particular column or not. |false|No|  
-|sortname|string|The column according to which the data is to be sorted when it is initially loaded from the server (note that you will have to use datatypes xml or json to load remote data). This parameter is appended to the url. If this value is set and the index (name) matches the name from colModel, then an icon indicating that the grid is sorted according to this column is added to the column. ​Also, this icon indicates the sorting order - descending or ascending (see the parameter sortorder ​below). Also see prmNames. |empty string|Yes| +|sortname|string| The column according to which the data is to be sorted when it is initially loaded from the server (note that you will have to use datatypes xml or json to load remote data). This parameter is appended to the url. If this value is set and the index (name) matches the name from colModel, then an icon indicating that the grid is sorted according to this column is added to the column ​headerThis icon also indicates the sorting order - descending or ascending (see the parameter ​''​sortorder''​). Also see ''​prmNames''​. |empty string|Yes| 
-|sortorder|string|The initial sorting order (ascending or descending) when we fetch data from the server using datatypes xml or json. This parameter is appended to the url - see prnNames. ​Two possible ​values - asc or desc.|asc|Yes| +|sortorder|string|The initial sorting order (ascending or descending) when we fetch data from the server using datatypes xml or json. This parameter is appended to the url - see ''​prnNames''​The two allowed ​values ​are ''​asc'' ​or ''​desc''​.|asc|Yes| 
-|subGrid|boolean|If set to true this enables using a subgrid. If the subGrid is enabled, an additional column at left side is added to the basic grid. This column contains a '​plus'​ image which indicate ​that the user can click on it to expand the row. By default all rows are collapsed. See [[Subgrid]]|false|No|+|subGrid|boolean| If set to ''​true'' ​this enables using a sub-grid. If the ''​subGrid''​ option ​is enabled, an additional column at left side is added to the basic grid. This column contains a '​plus'​ image which indicates ​that the user can click on it to expand the row. By default all rows are collapsed. See [[Subgrid]]|false|No|
 |subGridOptions| object | A set of additional options for the subgrid. For more information and default values see [[Subgrid]]. | see [[Subgrid]] | Yes | |subGridOptions| object | A set of additional options for the subgrid. For more information and default values see [[Subgrid]]. | see [[Subgrid]] | Yes |
-|subGridModel|array-[]|This property, which describes the model of the subgrid, has an effect only if the subGrid property is set to true. It is an array in which we describe the column model for the subgrid data. For more info see [[Subgrid]].|empty array|No| +|subGridModel|array-[]|This property, which describes the model of the subgrid, has an effect only if the subGrid property is set to ''​true''​. It is an array in which we describe the column model for the subgrid data. For more information ​see [[Subgrid]].|empty array|No| 
-|subGridType|mixed|This option allows loading subgrid as a service. If not set, the datatype parameter of the parent grid is used.|null|Yes| +|subGridType|mixed| This option allows loading ​subgrid as a service. If not set, the ''​datatype'' ​parameter of the parent grid is used.|null|Yes| 
-|subGridUrl|string|This option has effect only if subGrid option is set to true. This option points to the url from which we get the data for the subgrid. jqGrid adds the id of the row to this url as parameter. If there is a need to pass additional parameters, use the params option in subGridModel. See [[Subgrid]]|empty string|Yes| +|subGridUrl|string| This option has effect only if the ''​subGrid'' ​option is set to ''​true''​. This option points to the url from which we get the data for the subgrid. jqGrid adds the id of the row to this url as parameter. If there is a need to pass additional parameters, use the ''​params'' ​option in ''​subGridModel''​. See [[Subgrid]]|empty string|Yes| 
-|subGridWidth|integer| Defines the width of the subGrid ​column if subgrid is enabled.|20|No| +|subGridWidth|integer| Defines the width of the sub-grid ​column if ''​subgrid'' ​is enabled.|20|No| 
-|toolbar|array|This option defines the toolbar of the grid. This is an array with two elements in which the first element'​s value enables the toolbar and the second defines the position relative to the body layer (table data). Possible values are "top""bottom", and "both". When we set it like toolbar: [true,"​both"​] two toolbars are created -- one on the top of table data and the other at the bottom of the table data. When we have two toolbars, then we create two elements (div). The id of the top bar is constructed by concatenating the string "​t_"​ and the id of the grid, like ''"​t_"​ + id_of_the_grid''​ and the id of the bottom toolbar is constructed by concatenating the string "​tb_"​ and the id of the grid, like ''"​tb_"​ + id_of_the grid''​. In the case where only one toolbar is created, we have the id as '"​t_"​ + id_of_the_grid'',​ independent of where this toolbar is located (top or bottom)|[false,''​] |No| +|toolbar|array| This option defines the toolbar of the grid. This is an array with two elements in which the first element'​s value enables the toolbar and the second defines the position relative to the body layer (table data). Possible values are ''​top''​''​bottom''​, and ''​both''​. When we set it like ''​toolbar: [true,"​both"​]'' ​two toolbars are created -- one on the top of table data and the other at the bottom of the table data. When we have two toolbars, then we create two elements (div). The id of the top bar is constructed by concatenating the string "​t_"​ and the id of the grid, like ''"​t_"​ + id_of_the_grid''​ and the id of the bottom toolbar is constructed by concatenating the string "​tb_"​ and the id of the grid, like ''"​tb_"​ + id_of_the grid''​. In the case where only one toolbar is created, we have the id as ''"​t_"​ + id_of_the_grid'',​ independent of where this toolbar is located (top or bottom)|[false, ​%%''​%%] |No| 
-|toppager|boolean|When enabled this option ​place a pager element at top of the grid, below the caption (if available). If another pager is defined both can coexists ​and are kept in sync. The id of the newly created pager is the combination ''​grid_id + "​_toppager"''​. |false|No| +|toppager|boolean|When enabled this option ​places ​a pager element at top of the grid, below the caption (if available). If another pager is definedboth can coexist ​and are kept in sync. The id of the newly created pager is the combination ''​grid_id + "​_toppager"''​. |false|No| 
-|totaltime|integer|Readonly parameter. It gives the loading time of the records - currently available only when we load xml or json data. This measure ​begins when the request is complete and ends when the last row is added.|0|No| +|totaltime|integer| Readonly parameter. It gives the loading time of the records - currently available only when we load xml or json data. The measurement ​begins when the request is complete and ends when the last row is added. |0|No| 
-|treedatatype|mixed|Determines ​the initial datatype (see datatype option). Usually this should not be changed. During the reading process this option is equal to the datatype option.|null|No| +|treedatatype|mixed| ​Gives the initial datatype (see ''​datatype'' ​option). Usually this should not be changed. During the reading process this option is equal to the datatype option. |null|No| 
-|treeGrid|boolean|Enables (disables) the tree grid format. For more details see [[:​wiki:​treegrid | Tree Grid]]|false|No| +|treeGrid|boolean| Enables (disables) the tree grid format. For more details see [[:​wiki:​treegrid | Tree Grid]]|false|No| 
-|treeGridModel|string| Deteremines the method used for the treeGrid. ​Can be either nested or adjacency. See [[:​wiki:​treegrid |Tree Grid]]|nested|No| +|treeGridModel|string| Deteremines the method used for the ''​treeGrid''​The value can be either ​''​nested'' ​or ''​adjacency''​. See [[:​wiki:​treegrid |Tree Grid]]|nested|No| 
-|treeIcons|array|This array set the icons used in the tree. The icons should be a valid names from UI theme roller images. The default values are: ''​{plus:'​ui-icon-triangle-1-e',​minus:'​ui-icon-triangle-1-s',​leaf:'​ui-icon-radio-off'​}''​ | |No| +|treeIcons|array| This array sets the icons used in the tree grid. The icons should be a valid names from UI theme roller images. The default values are: ''​{plus:'​ui-icon-triangle-1-e',​minus:'​ui-icon-triangle-1-s',​leaf:'​ui-icon-radio-off'​}''​ | |No| 
-|treeReader|array|extends ​the colModel defined in the basic grid. The fields described here are appended to end of the colModel array and are hidden. This means that the data returned from the server should have values for these fields. For a full description of all valid values see [[:​wiki:​treegrid | Tree Grid]].| |No| +|treeReader|array| ​Extends ​the ''​colModel'' ​defined in the basic grid. The fields described here are appended to end of the ''​colModel'' ​array and are hidden. This means that the data returned from the server should have values for these fields. For a full description of all valid values see [[:​wiki:​treegrid | Tree Grid]].| |No| 
-|tree_root_level|numeric|Defines the level where the root element begins when treeGrid is enabled|0|No| +|tree_root_level|numeric| Defines the level where the root element begins when treeGrid is enabled|0|No| 
-|url|string|The url of the file that returns the data (in the appropriate format) ​needed to populate the grid.|null|Yes| +|url|string| The url of the file that returns the data needed to populate the grid.  May be set to ''​clientArray''​ to manualy post data to server; see [[wiki:​inline_editing&​s[]=clientarray |Inline Editing]]. |null|Yes| 
-|userData|array|This array contains custom information from the request. Can be used at any time.|empty array|No| +|userData|array| This array contains custom information from the request. Can be used at any time. |empty array|No| 
-|userDataOnFooter|boolean|When set to true we directly place the user data array userData in the footer. The rules are as follow: If the userData array contains a name which matches any name defined in colModel, then the value is placed in that column.If there are no such values nothing is placed. Note that if this option is used we use the current formatter options (if available) for that column.|false|Yes| +|userDataOnFooter|boolean| When set to ''​true'' ​we directly place the user data array ''​userData'' ​in the footer. The rules are as follows: If the ''​userData'' ​array contains a name which matches any name defined in ''​colModel''​, then the value is placed in that column. If there are no such values nothing is placed. Note that if this option is used we use the current formatter options (if available) for that column.|false|Yes| 
-|viewrecords|boolean|If true, jqGrid displays the beginning and ending record number in the grid, out of the total number of records in the query. ​ This information is shown in the pager bar (bottom right by default)in this format: "View X to Y out of Z"​. ​ If this value is true, there are other parameters that can be adjusted, including '​emptyrecords'​ and '​recordtext'​. |false|No| +|viewrecords|boolean| If ''​true''​, jqGrid displays the beginning and ending record number in the grid, out of the total number of records in the query. ​ This information is shown in the pager bar (bottom right by default)in this format: "View X to Y out of Z"​. ​ If this value is ''​true''​, there are other parameters that can be adjusted, including ​''​emptyrecords'' and ''​recordtext''. |false|No| 
-|viewsortcols|array| The purpose of this parameter is to define a different look and behavior ​of sorting icons (up/down arrows) that appear in the column headers. This parameter is an array with the following default options ''​viewsortcols : ''​. The first parameter determines if sorting icons should be visible on all the columns that have the sortable property set to true. Setting this value to true could be useful if you want to indicate to the user that [false,'​vertical',​true](s)he can sort on that particular column. The default of false sets the icon to be visible only on the column on which that data has been last sorted. Setting this parameter to true causes all icons in all sortable columns to be visible.\\ The second parameter determines how icons should be placed - vertical means that the sorting arrows are one under another. '​horizontal'​ means that the arrows should be next to one another. \\ The third parameter determines the click functionality. If set to true the data is sorted if the user clicks anywhere in the column'​s header. If set to false the data is sorted only when the icons in the headers are clicked. \\ <note important>​Important</​note> ​If you are setting the third element to false, make sure that you set the first element to true; else, the icons will not be visible and the user will not know where to click to be able to sort since clicking just anywhere in the header will not guarantee a sort.|[false,'​vertical',​true]|No| +|viewsortcols|array| The purpose of this parameter is to define a different look and behavior ​for the sorting icons (up/down arrows) that appear in the column headers. This parameter is an array with the following default options ''​viewsortcols : [false,'​vertical',​true]''​. The first parameter determines if sorting icons should be visible on all the columns that have the sortable property set to ''​true''​. Setting this value to ''​true'' ​could be useful if you want to indicate to the user that (s)he can sort on that particular column. The default of false sets the icon to be visible only on the column on which that data has been last sorted. Setting this parameter to ''​true'' ​causes all icons in all sortable columns to be visible.\\ The second parameter determines how icons should be placed - ''​vertical'' ​means that the sorting arrows are one under the other. '​horizontal'​ means that the arrows should be next to one another. \\ The third parameter determines the click functionality. If set to ''​true'' ​the data is sorted if the user clicks anywhere in the column'​s header, not only the icons. If set to false the data is sorted only when the sorting ​icons in the headers are clicked. \\ **Important:** If you are setting the third element to false, make sure that you set the first element to ''​true''​if you don't, the icons will not be visible and the user will not know where to click to be able to sort since clicking just anywhere in the header will not guarantee a sort. |[false,'​vertical',​true]|No| 
-|width|number|If this option is not set, the width of the grid is sum of the widths of the columns defined in the colModel (in pixels). If this option is set, the initial width of each column is set according to the value of shrinkToFit option.|none|No. Method avail.| +|width|number| If this option is not set, the width of the grid is the sum of the widths of the columns defined in the colModel (in pixels). If this option is set, the initial width of each column is set according to the value of the ''​shrinkToFit'' ​option. |none|No. Method avail.| 
-|xmlReader|array|Array which describes the structure of the expected xml data. For a full description refer to [[wiki:​retrieving_data#​xml_data| Retrieving Data XML Data]].| |No|+|xmlReader|array| ​An array which describes the structure of the expected xml data. For a full description refer to [[wiki:​retrieving_data#​xml_data| Retrieving Data in XML Format]]. | |No|
  
 ===== Setting Options Globally ===== ===== Setting Options Globally =====
-There are cases where you want to have some particular options to be changed (change the default value) and that this option should be a common for all your grids. This can be done using extend function of jQuery. \\+There are cases where you want to have some particular options to be changed (change the default value) and that this option should be a common for all your grids. This can be done using ''​extend'' ​function of jQuery. \\
  
-Let suppose that you want  to have a zebra like grid and want that all you grids have this options set to true. If you do not want this code to be written every time when you crate a grid here is a way to do this once (using the code from our tutorial):+Let us suppose that you want to have a zebra like grid (alternate rows have different colors) ​and want that all you grids have this options set to true. If you do not want this code to be written every time when you create ​a gridhere is a way to do it (using the code from our tutorial):
  
 <code html> <code html>
Line 143: Line 145:
 <​head>​ <​head>​
 <meta http-equiv="​Content-Type"​ content="​text/​html;​ charset=utf-8"​ /> <meta http-equiv="​Content-Type"​ content="​text/​html;​ charset=utf-8"​ />
 +<meta http-equiv="​X-UA-Compatible"​ content="​IE=edge"​ />
 <​title>​My First Grid</​title>​ <​title>​My First Grid</​title>​
   ​   ​
Line 161: Line 164:
  
 <script type="​text/​javascript">​ <script type="​text/​javascript">​
-// Here we set a globally ​the altRows option+// Here we set the altRows option ​globally
 jQuery.extend(jQuery.jgrid.defaults,​ { altRows:​true }); jQuery.extend(jQuery.jgrid.defaults,​ { altRows:​true });
 </​script>​ </​script>​
Line 172: Line 175:
 </​code>​ </​code>​
  
-You can add here as many as you want valid jqGrid options.+You can add as many valid jqGrid options ​as you want here.
  
 ===== How to Overwrite Global Options ===== ===== How to Overwrite Global Options =====
  
-In the previous example, we learned ​how to set common options for all grids in your application. ​  ​However, you might encounter situations where you'​d ​like to overwrite the global options for particular grid. +In the previous example, we learnt ​how to set common options for all grids in your application. However, you might encounter situations where you would like to overwrite the global options for particular grid. 
  
-To do this, you'​ll ​need to change the option in the desired grid. For example, let's say we set a global option for all rows to have alternating colors. ​ If we don't want alternating colors for a certain grid, just set altRows to false and the global option will be overwritten.+To do this, you will need to change the option in the desired grid. For example, let's say we set a global option for all rows to have alternating colors ​(the zebra grid).  If we don't want alternating colors for a certain grid, just set ''​altRows'' ​to ''​false'' ​and the global option will be overwritten.
  
 The code for this scenario can be found here: The code for this scenario can be found here:
Line 187: Line 190:
 <​head>​ <​head>​
 <meta http-equiv="​Content-Type"​ content="​text/​html;​ charset=utf-8"​ /> <meta http-equiv="​Content-Type"​ content="​text/​html;​ charset=utf-8"​ />
 +<meta http-equiv="​X-UA-Compatible"​ content="​IE=edge"​ />
 <​title>​My First Grid</​title>​ <​title>​My First Grid</​title>​
   ​   ​
Line 205: Line 209:
  
 <script type="​text/​javascript">​ <script type="​text/​javascript">​
-// Here we set a globally ​the altRows option+// Here we set the altRows option ​globallly
 jQuery.extend(jQuery.jgrid.defaults,​ { altRows:​true }); jQuery.extend(jQuery.jgrid.defaults,​ { altRows:​true });
 </​script>​ </​script>​

QR Code
QR Code wiki:options (generated for current page)